Open now · 24 hours, 7 days Licence 299307c 0434 410 612

Taps and toilets

Dripping tap or running toilet? Sorted in one visit

Washers, cartridges, mixers, cisterns and seals. Small jobs done properly, and still no call out fee.

  • $0 call out fee & free quotes
  • 24 hours, 7 days, public holidays
  • Price agreed before we start
  • 5.0 stars from over 50 Google reviews
  • Licensed plumber, drainer & gasfitter
  • Angelo answers the phone himself

Get a plumber out today

Fill this in and Angelo will call you right back.

Or call 0434 410 612 · answered 24 hours

$0Call out fee
60 minTypical arrival
5.0 ★50+ Google reviews
24/7Angelo answers

What we get called for

What we fix, and how?

Dripping tap Washer or ceramic cartridge, depending on the tap. Both done on the visit.
Toilet that will not stop running Inlet valve, outlet valve or a worn flush seal. Cheap to fix, expensive to ignore.
Mixer tap stiff or leaking Cartridge replaced rather than the whole tap, where the tap is worth keeping.
Low pressure at one tap Usually an aerator or a partly closed isolating valve. Rarely the dramatic thing people fear.
No hot water at one tap only A tap fault, not a hot water fault. Worth knowing before anyone quotes a new unit.
Leaking under the sink Traps, flexi hoses and connections. Flexis are worth replacing before they let go.

Call 0434 410 612

Why it happened

What actually goes wrong with taps and toilets

These are the small jobs, and small jobs are where people get overcharged most, because nobody shops around for a dripping tap. Nine faults cover almost all of them.

Worn tap washerThe classic dripping tap on older three quarter turn tapware. A cheap rubber part that has hardened. Twenty minutes and it is done.
Failed ceramic cartridgeModern quarter turn and mixer taps do not have washers. When they drip or go stiff it is the cartridge, which is replaceable without replacing the tap.
Worn tap seatThe brass surface the washer closes onto, pitted over years. A new washer on a bad seat drips again in a month, so the seat gets re-cut at the same time.
Toilet inlet valveThe part that refills the cistern. When it fails the cistern either runs constantly or takes forever, and it is the most common toilet fault we see.
Toilet outlet valve or flush sealA perished seal lets water trickle from the cistern into the pan. Silent, constant, and it shows up on the bill rather than the floor.
Mixer tap cartridgeStiff, leaking at the base, or water that will not run properly hot. Usually a cartridge, occasionally the whole body.
Perished flexi hoseThe braided hose under a sink or vanity. They have a service life of roughly five years and they fail by bursting, which is a flood rather than a drip.
Blocked aeratorThe screen in the tap spout filling with scale. Causes low or sideways flow at one tap only, and it is often mistaken for a pressure problem.
Loose or wobbly tapwareThe mounting nut under the bench working loose over years of use. Annoying on its own, and it eventually tears the seal and starts leaking into the cupboard.

Worth fixing now

Small signs that cost real money

None of these are urgent. All of them are cheaper this week than next year, and two of them end in a flood.

  • A tap dripping, even slowly
  • A cistern you can hear refilling when nobody has flushed
  • A tap that needs more force than it used to
  • Water seeping from the base of a mixer tap
  • Low flow at one tap while the rest of the house is fine
  • Flexi hoses under a sink or vanity older than five years
  • A damp or dark patch inside a vanity cupboard
  • A toilet that needs two flushes

How we do it

Repaired rather than replaced, where we can

The fast way to turn a dripping tap into a four figure invoice is to call it tapware that has had its day. Most taps are worth keeping.

Diagnose the actual partWasher, seat, cartridge or body. These are four different jobs and only one of them is expensive.
Re-seat as well as re-washerCutting the seat properly is what stops the drip coming back in a month. It is the step that gets skipped.
Carry the common partsWashers, seats, cartridges, inlet and outlet valves and flexi hoses are on the van, so a small job does not become two appointments.
Replace flexi hoses on sightIf we are under a sink and the hoses are old, we will tell you. Replacing them costs very little and a burst one costs a kitchen floor.
Honest about replacementSome tapware genuinely is finished, usually cheap imported bodies with no parts available. We will say so, and show you why.
Check the rest while we are thereIf there is a plumber in the house for a tap, the other taps and cisterns get a look at no extra cost.

What to expect

How the job runs

  1. 1 A real time, and a call firstA booking window and a phone call before Angelo arrives, rather than a day spent waiting in.
  2. 2 Priced before we startNo call out fee and nothing charged to quote, even on the smallest job. There is no minimum charge to get us out.
  3. 3 Done in one visitThe common parts are on the van, so a dripping tap does not turn into a second appointment next week.
  4. 4 Everything else checkedWhile we are there the other taps, cisterns and flexi hoses get a look. Finding a problem early is free.

What it costs

How a small job gets priced

Small jobs should be small bills. Four things move the number and none of them is a surprise at the end.

Which part has failedA washer is the cheapest case. A cartridge is more. A full mixer body is a different conversation and you are told that first.
How manyThree dripping taps on one visit costs far less than three separate visits. Save them up and tell us when you book.
The tapware itselfStandard brands have parts available. Some cheap imported tapware does not, which is the only time replacement is the honest answer.
AccessA tap on a vanity is simple. One buried behind a built-in cabinet or in a wall is not.

Our pricing promise

  • No call out fee and no minimum charge
  • The quote is free whether you go ahead or not
  • Repaired rather than replaced wherever the tapware allows
  • Several small jobs on one visit, priced as one visit
Call 0434 410 612

Before you ring

What is worth trying, and when to stop

Worth ten minutes

  • Unscrew the aerator from the tap spout and rinse the scale out of it
  • Check the isolating valve under the sink is fully open
  • Lift the cistern lid and check whether the inlet valve is sitting at the right level
  • Check whether it is one tap or the whole house, which tells you a lot
  • Count the drips. One a second is thousands of litres a year

Stop and ring instead

  • There is water inside the vanity or under the sink
  • A flexi hose is bulging, rusted or weeping at the fitting
  • The tap is stiff and you are about to use force on it
  • Water is coming from the wall behind the tap
  • The cistern is overflowing into the pan constantly
  • You have the tap apart and a part has broken off

Call 0434 410 612

The sum

What a drip actually costs you

A tap dripping once a second wastes in the order of twenty thousand litres a year. On Sydney Water rates that is not a catastrophe, but it is considerably more than the repair, and it happens every year you leave it.

A running toilet is the bigger one and the one nobody hears. A failed outlet seal lets water trickle from the cistern into the pan continuously, and because it goes straight down the drain there is nothing to see and nothing to mop. A single running cistern can waste more water than the rest of the household uses, and the first anyone knows is a quarterly bill that has doubled.

The one that is not about money is the flexi hose. Braided hoses under sinks and vanities have a service life of around five years, they are the leading cause of internal water damage claims in Australian homes, and they fail without warning by bursting at full mains pressure. If nobody has replaced yours and the house is more than five or six years old, they are overdue. The part costs very little. The flood does not.

So the honest advice on this page is to save the small jobs up, get them done in one visit, and have whoever is there replace the flexi hoses while the cupboard is already open.

Tap cartridge and a perished flexi hose

What Sydney says

Every review below is on our Google Business Profile. None of them are edited.

5.0 ★★★★★ from over 50 Google reviews
L
Lance RedgraveLocal Guide, 19 reviews · 5 months ago
★★★★★ Google review

Can't recommend Angelo at Cesco Plumbing highly enough. We'd been dealing with a leaking basin tap for ages, and other plumbers had quoted us thousands to fix it. Angelo came in and provided a super cost-effective repair that solved the problem properly. He also organised a leak detection service to help us pinpoint the source of another tricky leak we couldn't track down. His service, expertise, and pricing are hard to beat. Absolutely would recommend to anyone looking for an honest, skilled plumber.

T
TawlaLocal Guide, 104 reviews · 10 months ago
★★★★★ Google review

We hired Cesco plumbing recently to do some repair works at our warehouse. Apart from doing a great job, the three things that really impressed me were: 1) they arrived on time 2) they cleaned up after themselves 3) they quoted honestly saving my business thousands compared to our other quotes. Thanks Cesco. Highly recommended!!

R
Rachel Bulmer6 reviews · 9 months ago
★★★★★ Google review

Absolutely fantastic service! Angelo and his Apprentice were prompt, professional, and completed the gas compliance thoroughly and quickly for my new home. I highly recommend Cesco for any plumbing or gas needs!

Read all reviews on Google

Questions

Before you call

Is a dripping tap worth calling a plumber for?

A tap dripping once a second wastes thousands of litres a year. It is one of the cheapest jobs we do and it pays for itself on the bill.

How much to fix a leaking tap?

It depends which part has failed, and a washer is a very different price to a full mixer body. Quoted before we start, with no call out fee and no minimum charge.

Do you do small jobs?

Yes. No job is too small and there is no minimum charge to get us out.

Can you fix it or does the tap need replacing?

Most taps are worth repairing. We tell you honestly when one is not, and quote both.

My toilet runs constantly. Is that costing much?

A running cistern can waste more water than the rest of the house combined. Worth fixing this week, not next year.

Why does my tap drip again a month after it was fixed?

Because the seat was not re-cut. A new washer closing onto a pitted brass seat wears out almost immediately. Doing both is what makes the repair last.

What is a flexi hose and why do they matter?

The braided hose under your sink or vanity. They have a service life of about five years, they fail by bursting at full mains pressure, and they are a leading cause of internal water damage claims in Australia.

My mixer tap is stiff. Does it need replacing?

Usually not. Stiff or leaking mixers are almost always the ceramic cartridge, which is a part. The whole tap only goes where parts are not available.

Only one tap has low pressure. Why?

Almost always the aerator, which is the screen in the spout filling with scale. You can unscrew it and rinse it yourself in two minutes.

Can I book several small jobs at once?

Please do. Four small things on one visit costs a fraction of four separate call outs. Make a list and tell us when you book.

Do you supply the tapware or do I?

Either. Bring your own and we will fit it, or we can supply. If what you have chosen has no parts available down the track we will tell you before it goes in.

Is there a minimum charge for a tiny job?

No minimum charge and no call out fee to come and look. Small jobs should be small bills.

Worth knowing

Things worth knowing before you need us

Where we work

All of Sydney, based in the Inner West

Every corner of the city, from the beaches to the west. Ring and we will tell you straight away how long we will be.

  • Inner West
  • Sydney CBD & Inner City
  • Eastern Suburbs
  • North Shore
  • Northern Beaches
  • Northern Suburbs & Hills
  • Western Sydney
  • St George & Sutherland
  • South West Sydney

Suburb by suburb

Contact us

Want to speak to Angelo?

He answers his own phone, day or night. No call centre, no message bank, no waiting until Monday. If it can hold until the morning, send the form instead and he will ring you back.

0434 410 612

Text Angelo

  • Hours 24 hours, 7 days, public holidays included
  • Email [email protected]
  • Areas All of Sydney, based Inner West

Send an enquiry

For anything urgent, call. The form is for jobs that can wait until the morning.

Or call 0434 410 612 · answered 24 hours

Call 0434 410 612 24 hours · $0 call out fee Text Angelo
Call 0434 410 61224 hours · No call out fee